Teradek RT MK3.1 Wireless Lens Control Kit with 6-Axis Transmitter

Brands:
$5,700.00
SKU
Mfr # 15-0027

Teradek RT MK3.1 Wireless Lens Control Kit with 6-Axis Transmitter

The MK3.1 is a best-in-class 3-channel wireless lens control system for cinematographers and independent content creators. It has an operational range of up to 5000ft (1.5km) and fits seamlessly onto any industry standard camera due to its incredibly small and lightweight receiver.

Key Features

  • Customizable Camera Controls
  • Cinema quality wireless control of PL glass - Supports up to three lens motors
  • The smallest and lightest full three channel lens control receiver
  • Worlds first brushless vector drive lens motor 
  • 6-Axis MK3.1 Transmitter/Controller
  • 3-Channel MK3.1 Receiver
  • Supports up to two Thumbwheels
  • Super-low weight system
  • Powerful, near-silent motors
  • Unequaled 1.5Km range
  • Includes MK3.1 Motor with Drive Cable
  • Includes Hard Case

The MK3.1 is a best-in-class 3-channel wireless lens control system for cinematographers and independent content creators. It has an operational range of up to 5000ft (1.5km) and fits seamlessly onto any industry standard camera due to its incredibly small and lightweight receiver. Built for the most demanding applications, the MK3.1 controls focus, iris, and zoom with absolute precision using 3 brushless motors that offer faster response, smoother operation, and 4x the service life of brushed motors. Its 6-Axis controller is fully configurable and utilizes FHSS (Frequency Hopping Spread Spectrum) over the 2.4GHz band to avoid interference in extremely challenging RF conditions. T

6-Axis Controller

The 6-Axis Controller gives you extraordinarily precise control over your lenses with 6 mappable axes (knob, slider, 2x wheels, and Forcezoom X + Y) and a rugged chassis that fits comfortably in your hands. Its FHSS wireless system effectively cuts through the toughest interference and transmits latency-free commands over the 2.4GHz band at up to nearly 5000ft (1.5km). Mounted at the top of the controller is an OLED screen with intuitive menu system for calibration and reference, while the back of the controller features a removable Canon LP-E6 battery, which offers up to 36 hours of continuous runtime. What sets the 6-Axis Controller apart from the 4-Axis is the inclusion of a Forcezoom joystick, which is used for controlling lens zoom with perfect accuracy.

MK3.1 Motor Driver Receiver

The MK3.1 Motor Driver Receiver is the world’s lightest and smallest, allowing it to be easily mounted to any industry standard camera. It supports up to 3 motors for FI+Z control (Focus, Iris, and Zoom) and includes an auxiliary port for 2 analog inputs, trigger, and digital serial communication. The system receives commands from any Teradek 4-Axis or 6-Axis Controller at up to 5000ft (1.5km) away and includes automatic or manual (softstop) calibration with a proprietary algorithm for torque control and lens protection.

MK3.1 Brushless Lens Motor

The MK.3.1 Brushless Motor is a revolution in wireless lens control, offering superior response, smoother operation, and 4 times the service life of brushed motors. The motor never cogs, sparks, or skips and operates nearly silently, even at high speeds.

  • Adjustable motor response for silky smooth to quick and sharp moves
  • Drive gear can be mounted on either side
  • Lightweight, compact chassis design with super thin and flexible cables
  • Support for 15mm/19mm rods with good height adjustment
  • Full range of gears available
  • 2.2Nm maximum allowable torque

Specs Table

MK3.1 6-Axis Wireless Lens Controller with Joystick Zoom  
Power Requirements
Canon LP-E6 Battery: 6.2 to 8.4 V
USB Port: 4.75 to 9 V (maximum)
Transmission Rate: 16-bit
Range: 0.9 miles (1.5 km)
Latency 2 ms
Certifications FCC/IC/CE
Mounting Options 3 x 1/4"-20 holes
1 x lanyard mount
Material of Construction Aerospace-grade aluminum billet
Dimensions Excluding Knob: 5.5 x 2.8 x 1.2" (140 x 70 x 31 mm)
Including Knob & Antenna: 6.1 x 4.3 x 3" (155 x 110 x 75 mm)
Weight 1.3 lb (576 g)
RT MK3.1 Lightweight Receiver (3 Axis)  
Connections Motors: 3 x 4-pin LEMO 0B
Power: 1 x 4-pin Hirose HR10
Camera: 1 x 4-pin Hirose HR10
Aux: 1 x 5-pin LEMO 0B
USB: 1 x micro-USB
Status Indicators Solid Green: Connected
Orange: No connection (or PC Mode)
Blue: Wired mode
Purple: Please wait
Red (Solid): Camera running
Red (Pulse): Camera trigger
Power Requirements 8-15 VDC (17 V absolute maximum)
(The receiver will block any voltage over ~17.5 V, or any reverse voltage.)
Dimensions 3.9 x 1.3 x 0.9" (100 x 32 x 23 mm)
Weight 4.2 oz (118 g)
RT MK3.1 Brushless Lens Motor  
Maximum Torque 2.2 nm
Dimensions 4.5 x 1.6 x 1" (115 x 40 x 26 mm)
Weight 7.5 oz (212 g)
RT MK3.1 Motor Cable (24")  
Cable Length 23.6" (60 cm)
RT MK3.1 D-Tap Power Cable (24")  
Length 23.6" (60 cm)
Cable Connectors 4-pin Hirose, D-tap
RT Wired-Mode Controller Cable (6.6')  
Cable Length 6.6' (200 cm)
RT Case for MK3.1 System with Up to 3x Motors  
Dimensions 8.3 x 7.5 x 10.6" (21 x 19 x 27 cm)
Weight 4.4 lb (2 kg)
RT Receiver 19/15mm Rod Clamp with 1/4"-20 Mount  
Rod Clamp Type 15/19 mm
Mounting Screw 1/4"-20
LP-E6 Compatible 7.4V/2000mAh Battery Charger with US Plug  
Input Power 100 to 240 VAC, 50 / 60 Hz, maximum 150 mA
12 to 24 VDC
Output Voltage 4.2 VDC, 600 mA

In The Box

  • 1 x Lens Motor, 15/19mm rod motor bracket, 0.8 lens gear [15-0025]
  • 1 x MK3.1 Controller with Forcezoom [15-0002]
  • 1 x MK3.1 Receiver [15-0030]
  • 1 x MK3.1 Motor Cable [11-1391]
  • 1 x MK3.1 DTAP Power Cable [11-1368]
  • 1 x 2m Controller Wired Mode Cable [11-1413]
  • 1 x RTMotion Case [11-1416]
  • 1 x Receiver rod clamp [11-1439]
  • 1 x RTMotion Neck-strap [11-1443]
  • 1 x LP-E6 Duracell Battery [14-0014-1]
  • 1 x LP-E6 Travel charger [14-0015]
  • 3 x White disc [21-0501]