SKU
Mfr # 15-0026
No Longer Available
Teradek RT MK3.1 Wireless Lens Control Kit with 4-Axis Transmitter
The MK3.1 is a best-in-class 3-channel wireless lens control system for cinematographers and independent content creators. It has an operational range of up to 5000ft (1.5km) and fits seamlessly onto any industry standard camera due to its incredibly small and lightweight motor receiver.
Key Features
- 3-Channel MK3.1 Receiver
- Cinema quality wireless control of PL glass - Supports up to three lens motors
- The smallest and lightest full three channel lens control receiver
- Includes MK3.1 Motor with Drive Cable
- Worlds first brushless vector drive lens motor
- 4-Axis MK3.1 Transmitter/Controller
- Well over 1km rock-solid wireless range, ideal for busy cities, stadiums and other harsh RF environments
- Supports up to two Thumbwheels
- Approx. 3000' Range
Specs Table
RT MK3.1 4-Axis Wireless Lens Controller | |
---|---|
Power Requirements | Canon LP-E6 Battery: 6.2 to 8.4 V USB Port: 4.75 to 9 V (maximum) |
Transmission | Rate: 16-bit Range: 0.9 miles (1.5 km) |
Latency | 2 ms |
Certifications | FCC/IC/CE |
Mounting Options | 3 x 1/4"-20 holes 1 x lanyard mount |
Material of Construction | Aerospace-grade aluminum billet |
Dimensions | Excluding Knob: 5.5 x 2.8 x 1.2" (140 x 70 x 31 mm) Including Knob & Antenna: 6.1 x 4.3 x 3" (155 x 110 x 75 mm) |
Weight | 1.3 lb (576 g) |
RT MK3.1 Lightweight Receiver (3 Axis) | |
Connections | Motors: 3 x 4-pin LEMO 0B Power: 1 x 4-pin Hirose HR10 Camera: 1 x 4-pin Hirose HR10 Aux: 1 x 5-pin LEMO 0B USB: 1 x micro-USB |
Status Indicators | Solid Green: Connected Orange: No connection (or PC Mode) Blue: Wired mode Purple: Please wait Red (Solid): Camera running Red (Pulse): Camera trigger |
Power Requirements | 8-15 VDC (17 V absolute maximum) (The receiver will block any voltage over ~17.5 V |
In The Box
- 1 x Lens Motor, 15/19mm rod motor bracket, 0.8 lens gear [15-0025]
- 1 x MK3.1 Controller [15-0001]
- 1 x MK3.1 Receiver [15-0030]
- 1 x MK3.1 Motor Cable [11-1391]
- 1 x MK3.1 DTAP Power Cable [11-1368]
- 1 x 2m Controller Wired Mode Cable [11-1413]
- 1 x RTMotion Case [11-1416]
- 1 x Receiver rod clamp [11-1439]
- 1 x RTMotion Neck-strap [11-1443]
- 1 x LP-E6 Duracell Battery [14-0014-1]
- 1 x LP-E6 Travel charger [14-0015]
- 3 x White disc [21-0501]
Write Your Own Review