Libec LX-ePed Electric Pedestal Column with Ground Spreader

Raise and lower your mounted camera of choice with this LX-ePed Electric Pedestal Column with Ground Spreader from Libec thanks to its handheld controller and working height range of 37.5 to 97.2". Mount a camcorder, PTZ, or other recording device on the tripod using the 1/4"-20 and 3/8"-16 screws on its 100mm ball head and 22 lb load capacity.

LAN ports on both the pedestal column and controller unit allow the devices to communicate with one another. The elevation rocker on the controller allows for the intuitive raising and lowering of the tripod's center column. The included ground spreader provides additional security to the system, and an AC/DC power adapter provides power.

Electric Elevation Pedestal with Remote Control

The remote-controlled LX-ePed adds the elevating element to the PTZ camera's pan, tilt and zoom features. This will provide more "Angles of View", and make setup adjustments easier in studios.

Continuous Speed Adjustment

The speed of the Upper Column is adjustable by tilting the rocker of the Controller. The slow mode enables fine-tuning settings.

Highly Reliable Wire Connection System

The LX-ePed's Controller does not use Wi-Fi or Bluetooth, therefore users can focus on their shoots without worrying about radio wave interference. In addition, the Controller is PoE powered, so there is no need to connect it to a power source or charge it as well.

V-mount Battery Powered (optional)

By using the optional "VM-12V", the LX-ePed can be powered by any V-mount battery. This allows the pedestal system to be operated at any location.

Compatible with Flat-Base Equipment with a 1/4" or a 3/8" Screw Hole

The included "BL-F" flat-base adapter is compatible with not only PTZ cameras but also different types of equipment with 1/4" and 3/8" screw holes.

Compatible with Video Heads

By removing the "BL-F", a 100mm ball video head can be mounted on the LX-ePed. In addition, by using the optional "AD-75" adapter ring, a 75mm ball video head can be mounted as well.

Compact Design

The Main Unit and the Dolly/Floor Spreader, which are all foldable, can be separated from each other for easy transportation. The compact Main Unit weighs only 10kg/22.7lb and can be stored in the optional "RC-80" tripod case.

High-Angle Shots

Dynamic high-angle shots can be achieved with the LX-ePed and the LX-ePed Studio's maximum heights of 247cm/97.2" and 261cm/102.7" respectively.

User-Friendly Accessory Port

An Accessory Port, which has a 1/4" screw hole and a 3/8" screw hole, is equipped on two of the three sides of the tripod base.

Safety Design

With safety in mind, the electric column is carefully designed to prevent users from pinching their fingers.

Built-in Bubble Level

A bubble level is embedded at the base of the Head Mounting Platform for easy setup.

ID: 49826829795614