oconnor

OConnor Handle, 30 degree bend, 12 inch length, 18mm diameter (p/n 1030-246) . OConnor Handle, 30 degree bend, 12 inch length, 18mm diameter (p/n 1030-246)

The OConnor 1030-268 Large European Quick Release with 120mm camera mounting plate is for use with the OConnor 1030B and 1030S fluid heads. It is employed when rapid mounting and dismounting is required with large, heavy cameras.

OConnor Ultimate 1040 Tripod System Overview Enjoy precise pan and tilt control for smooth camera moves, plus the stability of the lightweight flowtech 100 legs with the OConnor 1040 Fluid Head and flowtech 100 Tripod System with Handle and Case. Combining the Ultimate 1040...

The Oconnor 120EXe Fluid Head is a heavy duty fluid head that shares the same features as the OConnor 120 EX, however it also digitally encodes pan and tilt position information for visual effects work, including compositing and motion capture. The Fluid head supports...

The OConnor 2575-135 Bottom Handle Extension is designed to work with both 1030-246 and 2575-137 telescoping pan handles. This extension fastens onto the pan handle via a locking lever. It features a padded bottom grip for increased operating comfort.

This OConnor 2575-137 Top Half of Telescoping Pan Handle is compatible with the OConnor 2065, 2575, and 120EX fluid heads. Use its lever-based screw to connect the handle to a rosette on either side of the head for right or left-handed use. A separately...

With the 30L Carbon Fiber Tripod OConnor replaces the legacy 25L & 35L lines of tripods. Combining the benefits of new-age materials with precision engineering has created a support system which is both lightweight, yet solid and stable, an ideal fit for the new...

OConnor C1264-0001 Overview The OConnor Camera Assistant Bag is designed to securely hold your fluid head and other gear and to be comfortably worn around the back or shoulder or carried by hand. It's a fully waterproof bag featuring quality stitching and zippers and...

OConnor 8395 Required 100mm Tiedown (for 100mm Ball Base 08365) . OConnor 8395 Required 100mm Tiedown (for 100mm Ball Base 08365)

OConnor C1221-00015 Ground Spreader for Cine HD Tripod The OConnor C1221-00015 Ground Spreader is for use with the Cine HD tripod. It greatly enhances stability of the tripod with heavy loads while providing protection for delicate floor surfaces.

The three key way head fitting of the OConnor C1221-0002 Cine HD Baby Tripod makes for quicker mounting of Mitchell mount tripod heads, while still maintaining the solid support O'Connor is known for. The single-stage design and die-cast spider ensure maximum rigidity for head...

The CINE HD tripod is the perfect choice for heavy payloads that must be supported in a safe and reliable manner. It is not uncommon to encounter a barrage of exotic materials when perusing high-end support systems, but you'll find no such thing when...

It is not uncommon to encounter a barrage of exotic materials when perusing high-end support systems, but you'll find no such thing when you investigate the OConnor C12210003 Cine HD Tripod. Based on time-proven aluminum alloy metallurgy, there will be no surprises, and it...

It is not uncommon to encounter a barrage of exotic materials when perusing high-end support systems, but you'll find no such thing when you investigate the OConnor C12210004 Cine HD Baby Tripod. Based on time-proven aluminum alloy metallurgy, there will be no surprises, and...

The OConnor C1225-1007 Geared Platform Plate Assembly is a mounting plate that interfaces with a drive gear in the OConnor 120EX and 120EXE fluid heads for precisely balancing cameras weighing up to 240 pounds. After you mount the camera and roughly adjust the balance,...

The OConnor 120EX Standard Assembly C12250001 is the flagship of fluid head design. With a payload capacity of 120 lbs it is the right choice for larger format film and video cameras. This device features 90 to 90 degree tilt with a folding crank...

Ultimate 1030Ds Fluid Head for Cameras up to 41 lbs (18.6 kg). (Mfr # C1239-0111) An updated replacement of the popular Ultimate 1030HD and HDs, the new line offers a sporty industrial design and a slew of features that have been borrowed from the...

This OConnor Front End Handle is designed to fit into the front rosette of the 2560 fluid head. This gives the operator the ability to maneuver and position the camera safely, accurately, and comfortably.

For Mitchell base 08281 and C1225-1011. This Mitchell Tie-Down is designed to be used with 1030DS, 1030D, 2575D and 120EX Fluid Heads.

The OConnor Ultimate 1040 Fluid Head is a lightweight fluid head that shares features with the other fluid heads in the OConnor Ultimate fluid head line. This allows operators to easily transition between lighter and heavier cameras without having to relearn or think about...