libec

Libec FPR-1 Foot Pedal Remote Control for LX-ePed Overview Enhance your video production efficiency with the Libec FPR-1 Foot Pedal Remote Control, specifically designed for the LX-ePed system. This robust and intuitive remote control pedal simplifies camera movements, making it an essential tool for...

Sliding Plate Range for Camera Balance The 650EX is equipped with a sliding plate range that allows users to balance their camera even quicker, a key improvement from the previous model's fixed quick shoe. One-touch Flip Locks Designed with efficient one-touch flip locks, users...

The Libec A-9EX Sony PMW EX to Fujinon ENG Lens Adaptor for Zoom Control is a conversion adapter that allows you to connect and gain zoom access to Fujinon's ENG lenses using a Sony PMW-EX camera.

The Libec A-9EX Sony PMW EX to Fujinon ENG Lens Adaptor for Zoom Control is a conversion adapter that allows you to connect and gain zoom access to Fujinon's ENG lenses using a Sony PMW-EX camera.

The Libec A12P 12-pin Adapter Cable is an 8-pin to 12-pin adapter that adapts the Libec PH-9 remote control handle to Fujinon broadcast lenses with a 12-pin connector.

120cm/47" long slider with a payload of 15kg/33.0lb. (Mfr # ALX S12) Key Features: Roller Bearing Sliding System33 lb Load Capacity on Flat Surfaces43.5" Travel Distance47" Total Track Length

Libec ALX S4 Slider (15.5"). (Mfr # ALX S4) Key Features: • Roller Bearing Sliding System• 33 lb Load Capacity on Flat Surfaces• 12" Travel Distance• 15.5" Total Track Length

The ALX S8 KIT from Libec is a camera slider system comprising the ALX T 2-stage aluminum tripod, ALX H fluid head, and ALX S8 slider. The slider uses eight roller bearings to provide smooth camera slides, with a maximum travel distance of 28"....

Libec ALX S8 Slider (32.6"). (Mfr # ALX S8) Key Features: • Roller Bearing Sliding System • 33 lb Load Capacity on Flat Surfaces • 28" Travel Distance • 32.6" Total Track Length

Libec ALX T Aluminum Tripod with Mid-Level Spreader (75mm Bowl) The ALX T can support up to 55 lb and offers a 75mm bowl fitting for holding a wide variety of heads. The standard two-stage legs have a height range of 23.5 to 59",...

Smart quick release adapter.

Libec AS-7K Accessory Support Kit Perfect accessory support kit for which can be attached to cameras, accessory plates and also to Libec heads by using accessory support adapter (A-7) which is included in the kit.*  Fitting angle can be adjusted flexibly to enable suitable...

Libec Control Cable for REMO30 Remote Pan and Tilt Head 5m/16.5' control cable for head, LANC* and monitor. For use with Remo30 and Jib 50. Control cables can be connected to extend up to 30m/99.0' in length. Key Features  Control Cable for REMO30 Remote Head 16.5'...

The Libec CR-90 Curved Track Rail with Case set is a lightweight aluminum track set that sets up quickly and easily. This set completes a 90 degree turn, and interfaces perfectly with the Libec track system.

Compact heavy duty dolly with cable guard and tracking lock.

Heavy duty dolly with cable guard and tracking lock

Libec DL-8B Heavy Duty Dolly for T102B and T102B Tripods (Black) (Mfr # DL-8B) Key Features: 5" Casters for Easy Mobility Weight Capacity of 198lb Brake Locking System Quick & Easy To Set Up

Heavy duty dolly for T102B, T103B, and P110B

This Libec EX-160S Track Rail Extension is quick and easy to set up. This lightweight aluminum rail can be your solution for when you need just a bit more track to roll on, or when you have a specific need for a short track...

Add an extension cable when using a zoom controller and ENG servo lens with this EX-530PRO Zoom Extension Cable from Libec. This extension cable is used to control zoom functions on ENG lenses, and it measures 17.5' in length.