Libec LX10 Studio Two-Stage Aluminum Tripod System and H65B Head with Dual Pan Handles and Spreader Dolly

Brands:
$820.00
SKU
Mfr # LX10 STUDIO

Libec LX10 Studio Two-Stage Aluminum Tripod System and H65B Head with Dual Pan Handles and Spreader Dolly

Outstanding payload and rigidity with extremely smooth torque performance at the best value in the range. Remarkably high-performance features with incomparable cost effectiveness.

Key Features 

  • Lightweight and robust
  • 2-stage construction
  • High payload capacity
  • Supports 35 Pounds
  • Fixed Counterbalance System
  • 100mm Half Ball
  • Spreader Dolly

Libec LX10 Studio (LX-10-Studio) Tripod System with LX10 Head, RT50B Tripod and DL-3RB Dolly. Outstanding payload and rigidity with extremely smooth torque performance at the best value in the range. Remarkably high-performance features with incomparable cost effectiveness.

  • The sliding balance plate features a total of four inches of balance adjustment, two inches forward and two inches back of center. This does not take into account the integrated balance slot that allows you to adjust the position of the captive camera tie-down screw.
  • The head incorporates a small stud at the front that prevents the balance plate from sliding out.
  • The included spreader dolly secures your tripod's legs, but allows you to roll your tripod from one point to another on a smooth surface. It can be used during a shot, but it is not as smooth as a true dolly.

Specs Table

Payload 35 lb / 16 kg
Counterbalance Fixed
Drag Mode Two-step
Tilt Angle +85° / -65°
Camera Plate Sliding
Sliding Range ±2" / 50 mm
Plate Attachment Two 3/8"-16 screws
Spare Screw 3/8"-16
Section Two-stage
Bubble Level Non-illuminated
Ball Diameter 100 mm
Temperature Range -4 to 140°F / -20 to +60°C
Height 36.0 to 73.5" / 91.4 to 186.9 cm
Weight 23.3 lb / 10.6 kg

In the Box

  • Libec LX10 Studio Two-Stage Aluminum Tripod System and H65B Head with Dual Pan Handles and Spreader Dolly
  • Standard Manufacturer's Warranty