Libec ALX S8 Slider (32.6")

Libec ALX S8 Slider (32.6")
Libec ALX S8 Slider (32.6")

Libec ALX S8 Slider (32.6"). (Mfr # ALX S8)

Key Features:

• Roller Bearing Sliding System
• 33 lb Load Capacity on Flat Surfaces
• 28" Travel Distance
• 32.6" Total Track Length

Sliding Range

28" (71.1 cm)


33 lb (15 kg) (when not mounted on a tripod)

Head Attachment

3/8"-16 screw

Tripod Mount Types

75 mm ball base
1/4"-20 and 3/8"-16 threaded holes on bottom of 75 mm ball base
1/4"-20 and 3/8"-16 threads along the bottom for mounting on two tripods

Accessory Mounting

1/4"-20 and 3/8"-16 threaded holes (at each end of tripod)


Aluminum alloy and engineering plastic


32.6" (83 cm)


4 lb (1.8 kg) (excluding tripod mount adapter and bowl tie-down)

Standard Manufacturer's Warranty.

The Libec ALX S8 is a 32.6" long camera slider that features an integrated 75mm ball base with a flat bottom, allowing it to be mounted directly to 75mm bowl fluid heads as well as flat-base heads. When used on tabletop or flat surface using, the slider has a maximum load capacity of 33 lb. For smooth and wobble-free operation, the carriage features eight roller bearings positioned on the rail top and along the sides at angles. A spring-loaded friction knob allows you to adjust slide tension, while a brake knob will lock the carriage in place at any point on the rails. Using a supplied hexagon wrench, you can adjust the pushing force that the ball bearing exerts on the rail.

At each end of the slider, there are 1/4"-20 and 3/8"-16 threads and a rosette for attaching various accessories. If you will be using the slider on the ground or tabletop, the slider features built-in legs with height-adjustable feet to accommodate non-level terrain. For compact storage, the legs fold up against the side of the slider, securing in place using thumb knobs. Unscrewing the knobs completely allows you to detach the legs completely and swap out the 32.6" rail for separately available 15.5" or 47" rail lengths.

Key Features

28" slide range with a 33 lb payload
33 lb load capacity when used on a tabletop or flat surface
Dual-base tripod mount adapter and bowl clamp for mounting on a tripod with a flat-base or 75mm ball head
Eight high-performance ball bearings on the top and sides allow for smooth, wobble-free motion
Tension/friction knob, brake knob, and bubble level
32.6" rail can be swapped for optional 15.5" or 47" rail lengths
Collapsible tabletop legs for easy setup and storage
Height-adjustable feet
Includes padded carrying case with fixing handle and maintenance kit

Write Your Own Review
You're reviewing:Libec ALX S8 Slider (32.6")
Your Rating