ARRI Lighting

L2.37563.1 Scrim Bag for 571mm / 22.5 "scrims

Designed for enhancing the quality of light, the Diffusion Kit for SkyPanel S120 LED Light from ARRI contains three modifiers that either soften or boost the output from this LED fixture. The kit is comprised of one Lite and one Heavy Diffusion panel for...

This ARRI Spill Ring is compatible with the M90 lamphead. The ring attaches between the barndoors and the lamp in order to prevent light spill from the sides.

The 24 x 32" Chimera Lightbank with Frame for S30 SkyPanel from ARRI softens the light's output, reduces contrast, and widens the beam spread by roughly 100%. The included frame mounts to the side of the SkyPanel's outer frame.

The Double Vertical Yoke for SkyPanel S30 LED lights from ARRI allows you to mount two fixtures, one above the other.

The ARRI 4-Leaf Barndoor Set for the 300W Fresnel, 125W HMI Fresnel, and 200W Pocket-Lite and Pocket PAR is used to control the shape of the light emitted from the fixture. It can be used to screen backgrounds, control reflections, or narrow the lighting...

The Short Yoke for the SkyPanel S360 is designed for hanging the fixture facing downward. Hugging the back back of the fixture, the Short Yoke provides a reduced distance between the fixture and the mounting point. The Short Yoke easily replaces the standard yoke...

ARRI offers a comprehensive range of lighting cables, from head-to-ballast cables and mains/extension cables to power DMX cables and battery/adaptor cables. For every rigging challenge, there is a cabling solution.

This is an ARRI 4-Leaf Barndoor Set that fits the T1 Location Frensel. Barndoors attach to the front of a light and are used to restrict light from areas of a set. ARRI barndoors are heat resistant and rotatable.

The Safety Cable will provide an extra level of safety once attached properly to the fixture or the accessory. These safety cables comply with the German standard DIN 56927.

Customize the output of your SkyPanel S120-C series LED light with this Lite Diffusion Panel from ARRI. It helps soften the light output white also creating a homogeneous beam for uniform light distribution. It is quick to implement, as the rigid plastic material and...

The ARRI Chimera POP Bank for SkyPanel S30 mounts directly onto the fixture without a frame and softens the LEDs' bright output. The bank includes both full and half diffusers for contrast options.

Narrow the spread of light coming from your Skypanel S60 LED Softlight with this DoPchoice SnapGrid from ARRI. Able to be mounted either directly to the light or an optional softbox, this 40° grid will control light spill from the fixture. It measures 35...

The dome optics for Orbiter by DoPchoice are fabric spheres available in three different sizes. They easily attach to the front of the Orbiter and form a ballon shape. The DoPchoice Large Dome for Orbiter from Arri is a 39" translucent fabric sphere that...

The Orbiter Bag-o-Light by Licht-Technik is an ideal accessory for close-up applications in motion picture and photography where soft light with almost no shadows is required. This accessory, looking like a huge tube, transforms the light output from the standard 15° Open Face optic...

This is an ARRI 4-Leaf Barndoor Set for the 650W Fresnel, 200W HMI, 400W Pocket PAR, and Pocket Lite. Barndoors attach to the front of a light and are used to restrict light from areas of a set. They have either four or eight...

The ARRI Skid for Orbiter is a durable, aluminum base measuring approximately 1" high that can be used as a replacement for the rubber feet shipped with the light. The skid protects the bottom of the fixture in rugged terrain or during low-angle shooting....

Dedicated to the ARRI SkyPanel S360 LED Softlight, this 60° Honeycomb Grid adds directionality to the light output and helps to control light spill by narrowing the beam angle to 60°. The grid slides into the S360's primary accessory slot and its honeycomb design...

The Small Quartz Plus is designed for use with large open-face hot lights. It is rated up to 4,000 Watts and diameters from 9 to 21.5 inches. It may also be used with a strobe light, but this is not economical in the long...

The ARRI UV Glass Upgrade Kit for M18 and AS18 Lamp Heads adds UV protection to the discontinued AS18 or the M18 HMI lamp heads. The kit includes 2 pieces of UV glass, 4 lens holding springs, 5 screws and a Safety Switch Activator...