Zhiyun Crane 2 with Servo Follow Focus (Mechanical) (CMF-01) FREE

Crane 2

Promo: Buy Zhiyun-Tech Crane 2 & get Follow Focus (Mechanical) FREE

Zhiyun-Tech Crane-2 3-Axis Stabilizer with Follow Focus for Select Canon DSLRs. (Mfr # CRANE-2)

Key Features:

For Mirrorless & DSLR Cameras up to 7 lb
FF Control for Select Canon DSLRs
Pro-Grade Image Stabilization
OLED Display
Camera Control via Handgrip Buttons
6000mAh Battery Runs up to 18 Hours
Power Select Sony Cameras via Gimbal
Quick Release Camera Plate
Gradual Power-Down Protects Camera

Gain greater control over your gimbal shots with the Zhiyun-Tech Crane-2, a 3-axis handheld stabilizer with an integrated follow focus control for select Canon cameras. The Crane-2 supports DSLRs, mirrorless cameras, and camcorders weighing up to a solid seven pounds. Connect your Canon DSLR or mirrorless camera (released after 2008, with an original autofocus lens) to the gimbal via cable, then adjust focus using the large thumbwheel on the handgrip. The Crane-2 offers three levels of focus control, enabling you to fine-tune your focusing based on the lens used, and the shot itself.

For quick, convenient adjusting of your camera's settings, the Crane-2 provides an interface comparable to those found on most cameras. Two large buttons, and two smaller ones, on the handgrip are pressed or rotated to scroll through and choose parameters. An LED screen above the controls enables you to quickly and easily monitor your settings. The Crane-2 offers improved motor torque, response speed, and image stabilization over earlier Zhiyun models, enabling smooth, reliable moves.

Shoot up to a whopping maximum of 18 hours—the Crane-2's three 18650-type batteries provide 6000mAh of capacity. Select Sony cameras may be charged through the gimbal, eliminating time otherwise spent swapping out camera batteries. Additional Crane-2 features include a Manfrotto-standard quick release plate for rapid camera mounting, and a "slow-fall" function that protects your camera from a sudden drop when the stabilizer is powered down.


Supports cameras weighing up to 7 pounds
Improved torque, response, and image stabilization over prior models
Quick, direct camera control via handgrip buttons
LED screen displays camera and stabilizer settings
Manfrotto-standard quick release plate for quick camera mounting
Maximum of 18-hour runtime with included batteries
"Slow-fall" feature protects your camera from a sudden drop when the Crane-2 is powered down
Power select Sony cameras through the stabilizer


Operating Voltage Minimum: 9.8 V

Standard: 11.1 V

Maximum: 12.6 V

Operating Current Minimum: 110 mAh

Maximum: 6000 mAh

Output Voltage USB: 5 V

Camera Charging: 8 V

Output Current USB: 1 A

Camera Charging: 2 A

Battery Runtime Minimum: 12 h

Maximum: 18 h


Following Accuracy Static: ±0.01° to ±0.3°

Motion: ±0.05° to ±0.1°

Rotational Angle Range Tilt: -135° to +185°

Roll: 360°

Pan: 360°


Operating Temperature Minimum: 14°F (-10°C)

Standard: 77°F (25°C)

Maximum: 113°F (45°C)

Payload Capacity Minimum: 1.1 lb (500 g)

Maximum: 7.1 lb (3200 g)

Dimensions (WxDxH) 8.3 x 4.6 x 17.7" (21.0 x 11.8 x 45.0 cm)

Weight 2.8 lb (1.25 kg)

Zhiyun-Tech Crane-2 3-Axis Stabilizer with Follow Focus for Select Canon DSLRs
3 x 18650 Lithium-Ion Batteries
Battery Charger
Micro-USB Cable
Micro to Mini-USB Cable
Sony Camera Control/Charging Cable
Panasonic Camera Control Cable
Shoulder Strap
Carrying Case
Standard Manufacturer's Warranty