Teradek Bolt 500 SDI/HDMI Wireless Video Transceiver Set with One Receiver

Brands:
$3,420.00
SKU
Mfr # 10-0935-1

Teradek Bolt 500 SDI/HDMI Wireless Video Transceiver Set with One Receiver

Key Features

  • Transmit visually lossless video up to 500ft with no delay.
  • 2 New DFS Channels
  • More Robust Than Ever Before
  • Rapid Reconnection
  • Built-In HDMI to SDI Converter

The Bolt 500 SDI/HDMI Wireless Video Transceiver Set from Teradek includes one Bolt Pro 500 3G-SDI/HDMI transmitter and one Bolt 500 3G-SDI/HDMI receiver packed in a protective SKB case along with mounting brackets for both transmitter and receiver units. Also included in this set is the Wooden Camera Ultra Arm mini monitor mount with a 3/8"-16 arm ball. This set supports video transmission up to 500'.

Bolt 500 3G-SDI/HDMI Video Transmitter

  • Eleven 5 GHz channels
  • Supports full HD (1080p) resolution
  • Low latency of up to 0.001 sec
  • Integrated 3D LUT technology
  • Upload your own LUTs using the free Bolt Manager software or select from a number of built-in presets using Bolt's OSD
  • Bolt's USB 3.0 GRAB Engine allows you to ingest a Bolt feed directly into a computer or your DIT cart without any added delay or loss of quality
  • Supports metadata, timecode, and start/stop flags from many camera manufacturers, including RED, ARRI, Canon, Sony, and Panasonic
  • Housed in a hardened aluminum chassis
  • 1/4"-20 holes for mounting to cameras and monitors as well as 2-pin LEMO connectors for power

Bolt 500 3G-SDI Video Receiver

  • Eleven 40 MHz channels
  • Supports full HD (1080p) resolution
  • Low latency of up to 0.001 sec
  • Integrated 3D LUT technology
  • Upload your own LUTs using the free Bolt Manager software or select from a number of built-in presets using Bolt's OSD
  • Bolt's USB 3.0 GRAB Engine allows you to ingest a Bolt feed directly into a computer or your DIT cart without any added delay or loss of quality
  • Supports metadata, timecode, and start/stop flags from many camera manufacturers, including RED, ARRI, Canon, Sony, and Panasonic
  • Housed in a hardened aluminum chassis
  • 1/4"-20 holes for mounting to cameras and monitors as well as 2-pin LEMO connectors for power

Ultra Arm Mini Monitor Mount is an articulating arm with tool-less 1/4-20 knobs and non-slip rubber pads on each end and a center double ball clamp. This is a shorter version of the Ultra Arm and is ideal for keeping your LCD or accessory close to the camera body while still achieving a good range of motion.

Ultra Arm Ball (3/8-16) is a component of the Ultra Arm lineup which has a tool-less 3/8-16 screw knob, non-slip rubber pad, and a 25mm (1 inch) ball. Also included are two locating pins that can be installed turning it into an ARRI accessory mount compatible device! This can be combined with the Double Ball Clamp and other Ultra Arm accessories to build custom configurations.

This is an 18" 2-Pin LEMO to P-Tap Cable, from Teradek, for powering the 2-pin LEMO version Cube, Bolt, Bond, and Link from a P-Tap power source.

This is an SKB Protective Case, from Teradek, for 2nd generation Bolt transmitters/receivers. It fits one Bolt Pro 300, 600, or 2000 transmitter and two receivers.

Specs Table

Bolt 500 3G-SDI/HDMI Video Transmitter  
Video Inputs 1 x 75 Ohms BNC
1 x HDMI female Type A
Video Outputs 1 x 75 Ohms BNC (loop-out)
Input / Output 3G-SDI/HDMI
Color Sampling SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
HDMI: RGB 4:4:4, 8-bit
Latency <0.001 seconds
Delay <0.001 sec (when no video format conversion is enabled)
Supported Resolutions 1080p 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60
1080p sf23.98 / 24 / 25 / 29.97 / 30
1080i 50 / 59.94 / 60
720p 50 / 59.94 / 60
480p 59.94 / 576p 50 (via HDMI ports only)
480i (NTSC) / 576i (PAL)

Video Compression

Visually lossless

Color Correction CDL/1024 1D LUT (supports 10-bit color)
33 x 33 x 33 3D LUT (supports 10-bit color)
Channel Selection Auto
RF Power 17 dBm EIRP
Range Up to 500' (152 m)
Encryption AES-128
Audio Compression 48 kHz 24-bit PCM
Audio Input Embedded
Switches On/Off
Reset Switch
Application Bolt Manager Application for OSX & Windows
Construction Milled aluminum (chassis) and regulation-compliant PCB
Plastic cap
Power Input Connector 2-pin 7 to 28 VDC
Power Consumption 7.3 W nominal @ 1080p
 Operating Temperature  32 to 104°F (0 to 40°C)
   
Bolt 500 3G-SDI Video Receiver  
Video Outputs 1 x 75 Ohms BNC
1 x Micro-USB 3.0 female type B
Input / Output 3G-SDI
Color Sampling SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
Latency <0.001 seconds
Resolution 1080p60
Video Compression Visually lossless
Channel Selection Auto
RF Power 15 dBm EIRP
Range Up to 500' (152 m)
Encryption AES-128
Audio Compression 48 kHz 24-bit PCM
Power Input Connector 2-pin 7 to 28 VDC
Power Consumption 9 W nominal @ 1080p
Operating Temperature 32 to 104°F (0 to 40°C)

In the Box

Bundle Items

Bolt 500 3G-SDI/HDMI Video Transmitter
18" 2-Pin LEMO to PowerTap Cable
1/4"-20 Hot Shoe Adapter
10" SDI (BNC-to-BNC) Cable
18" HDMI Type A to Type A Cable
Limited 1-Year Warranty
Bolt 500 3G-SDI Video Receiver
1.25" Long 1/4"-20 Thumb Screw
1/4"-20 Lightstand Adapter
10" SDI (BNC-to-BNC) Cable
3' USB 3.0 Type-A to Micro-USB Type-B Cable
6' PSU 2-Pin LEMO to 18W AC Adapter Cable
Limited 1-Year Warranty
Ultra Arm Mini Monitor Mount (1/4"-20 to 1/4"-20)
Ultra Arm Ball with 3/8"-16 Screw Knob
2-Pin LEMO to P-Tap Cable (18")
Limited 1-Year Warranty
Protective Case for 2nd Generation Bolt Pro Transmitter & Two Receivers
Standard Manufacturer's Warranty

Also Includes

18" HDMI Cable (Type A to Type A)
10" Coiled SDI (BNC to BNC) Cable
Transmitter Mounting Bracket
Receiver Mounting Bracket
Standard Manufacturer's Warranty