AED 44,003.00
Excl. VAT
$11983Excl. VAT
Stock Availability: 3-6 weeks
SKU
TE100999V
Teradek Bolt 10K Receiver Kit With Bolt 3000 TX (VM)
Key Features:
Complete Bolt Set with Protective Utility Case
Super long range (10,000 ft.) receiver for Bolt 3000 TX
Works alongside Bolt 3000, 703 Bolt, and Sidekick II receivers
Fully integrated panel antenna
Built-in Gold- or V-mount battery plate
3G-SDI and HDMI outputs
Teradek Bolt 10K Receiver Kit With Bolt 3000 TX (VM)
Bolt Pro 3000 3G-SDI/HDMI TX
Video -
Video Inputs
1 x SD/HD/3G-SDI (75 Ohm BNC)
1 x Type A receptacle HDMI
Video Outputs
1 x HD/SD/3G-SDI Loop-out (75 Ohm BNC)
Sdi Ancillary Data Support
supports metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to:
https://support.teradek.com/hc/en-us/articles/217446087
Color Sampling
SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
HDMI: RGB 4:4:4, 8-bit
Delay Tx To Rx
<0.001sec (without format conversiond)
Bolt Pro 10K 3G-SDI/HDMI RX Gold Mount
Video -
Video Outputs
1 x SD/HD/3G-SDI (75 Ohm BNC)
1 x HDMI Type-A receptacle
1 x USB 3.0 micro B receptacle
Sdi Ancillary Data Support
supports metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to:
https://support.teradek.com/hc/en-us/articles/217446087
Color Sampling
SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
HDMI: RGB 4:4:4, 8-bit
Delay Tx To Rx
<0.001sec (without format conversiond)
General
2 x SDI BNC to BNC 10 in. Cable
2 x HDMI Type A to Type A 18 in. Cable
1 x Protective SKB Case - military-standard waterproof hard case with custom foam (22in x 17in x 8in)
Standard Manufacturer's Warranty
Transmitter
2 x Wireless Antennas (5dBi 5.8GHz)
1 x 2-pin Connector to PowerTap 18 inch Cable
1 x Hot Shoe Adapter (1/4"-20 inch)
Standard Manufacturer's Warranty
Receiver
1 x Lightstand Adapter (3/8 inch)
1 x PSU 2-pin Connector to 18W AC Adapter 6ft cable
1 x USB 3.0 Cable A to Micro B (3ft Length)
Standard Manufacturer's Warranty
Write Your Own Review