The Sony BPGL95A Graphite Lithium-Ion Battery is a lithium-ion chemistry battery for professional camcorders and VTRs that accept V-mount batteries. This battery has a power capacity of 95 watt hours, enough to run a 40 watt draw over 2 ½ hours. With interactive features and lithium chemistry's light weight, these batteries offer advanced reliability and portability.
The BP-GL series of batteries offer the most accurate power consumption and run-time information for PDW, MSW, and HDW series camcorders. Power-remaining data is viewed right through the viewfinder in 10% increments. For other camera systems, the LED display gives accurate power-remaining information in 20% increments.
Unlike other battery chemistries, these Li-Ion batteries provide full power output with consistent voltage over the entire run-time. Low voltage battery power often triggers a warning signal once voltage falls below a certain level, usually 12 volts. The BP-GL batteries provide at least 14.4 volts almost up to the very end of their power supply.
|WEIGHT||760 g (1 lb 10 oz)|
|DIMENSIONS (WXHXD)||92 x 138 x 41 mm (3 5/8 x 5 1/2 x 1 5/8 inches)|
|CAPACITY / WATTAGE||14.4V 95Wh|
Intelligent "INFO" battery that communicates digitally with Sony camcorders Remaining capacity indication on viewfinder of the DVW-970/970P, HDW-750/750P, HDW-730/730S, MSW-970/970P, PDW-510/510P, PDW-530/530P camcorders V-mount attaching mechanism for quick and easy battery change. Four-step green LED indicators for quick visual verification of the battery remaining capacity (more than 80%, 60%, 40%, 20%) Four-step orange LED indicators for quick visual check of battery remaining capacity (below 20%, 15%, 10%, 5%) When the BP-GL95 is used with camcorders other than those listed above