Libec TH-M Monopod Kit

Libec TH-M Monopod Kit
Libec TH-M Monopod Kit Libec TH-M Monopod Kit Libec TH-M Monopod Kit Libec TH-M Monopod Kit Libec TH-M Monopod Kit Libec TH-M Monopod Kit

By stepping on the lock/release foot pedals, conveniently located symmetrically in three sections on the Free stand base, you are able to quickly lock/release the monopod during photo and video shoots.

Pan Tilt Head with Dual Head Structure

Unlike other photo/video heads included with monopod kits, this head has tilt and pan functions, and has a dual head structure (flat base/65mm bowl), making the head compatible with 65mm bowl/flat base tripods, monopods, sliders, skater dollies, and other equipment with 3/8 inch screws.

Industry Standard sliding plates compatible with Manfrotto, Sachtler heads

This one touch on/off sliding plate is compatible with Manfrotto and Sachtler heads, enabling quick equipment swaps without the need to change sliding plates onsite.

Hands-Free Monopod

An exceptional mini tripod structure with increased stability, allows the monopod to stand on its own with a wide range of cameras, allowing users to multi-task and make equipment adjustments in between shots, without the need to lay the monopod on the floor or lean it against the wall.

Perfect Lock Feature

When users lock the bottom part of the monopod by stepping on the foot pedal, the ball joint will be locked as well. The pan movement of the head on the monopod is smoother than ever, allowing the users to control the camera's manual focus while panning at the same time when shooting.

Easy to Maintain

The free-stand's base has been redesigned allowing users to easily remove dirt when necessary.

Upgraded Head Attachment

The former HFMP monopod can only support equipment with a 3/8" screw hole, However, the new TH-M's head attachment is equipped with both a 1/4" screw hole and a 3/8" screw hole. On the top cover of the TH-M monopod, the 1/4" screw is covered by a storable 3/8" screw socket, allowing both kinds of equipment to be attached.

Smooth Panoramic Rotation

A special built-in lubricated ball joint system, designed to prevent dust and debris from entering, offers smooth quality movements.

Quick adjustments for your Preferred Height

A sleek design with numeric indicators for your preferred height settings, improving the usability when it is necessary to frequently adjust height settings.

Speedy Open / Close functions

Designed for swift setups and compact travel, these user-friendly folding legs can be easily opened and closed with a push of a button.

Dual size carrying bag Included

Dual size travel bag to carry and store the monopod with or without the head.

TH-M Hands-Free Monopod:
  • Video monopod designed with free-stand operation and a variety of shooting modes
  • Upgraded head attachment compatible with heads that are designed with a 1/4” or 3/8” screw hole
  • Perfect Lock Feature with innovative Step Lock/Release Foot Pedal and lockable Ball Joint
  • Instantly switch from shooting mode to a locked vertical position
  • Convenient click indicates when TH-M is released or locked into vertical position
  • Built-in lubricated ball joint system for smooth panoramic shots
  • Numeric height indicators and flip locks for preferred height adjustments
  • User-friendly folding legs for swift setups and compact travel
  • Robust aluminum material, yet lightweight for easy travel and transportation
  • Dual size designed carrying bag for run-and-gun operation and easy storage
Dual Base Video Head:
  • Flat base design for monopods, sliders, skater dollies, and gear equipped with a 3/8” screw
  • 65mm ball design for 65mm bowl tripods
  • Supports many of today’s cameras with a payload of 9lbs (4.0 kg)
  • Built-in counterbalance for precise camera balance and tilt movements
  • Dual pan handle rosettes for additional pan handle or support arm
  • Equipped with a bubble level for easy head leveling
  • Amazingly lightweight at 1kg/2.2lb including the pan handle.
  • Industry standard sliding plate compatible with Sachtler & Manfrotto heads
  • Snap on/off sliding plate for easy camera balance adjustments
  • Plate slides +/-30mm / 1.2” front to rear and includes a 1/4" screw
TH-M Kit
Payload
4kg / 9lbs (C.G. 55mm)
Tilt angle
+90°/ -80°
Dual Pan Function Design
Pan function on head
Temperature range
-20°C to +60°C / -4°F to +140°F
Weight
2.7kg / 5.9lb
Height
87.5 to 189.5cm / 34.4 to 74.6"
Section
2 STAGE
Leg Lock Type
Lock/ Release Levers
Head attachment screw
1/4" screw, 3/8" screw
Construction Material
Aluminum
Pipe Diameters (upper/mid/low)
34.0mm/29.5mm/25.0mm
Monopod Case
Included
Write Your Own Review
You're reviewing:Libec TH-M Monopod Kit
Your Rating