Libec LX10 M Two-Stage Aluminum Tripod System and H65B Head and Mid-Level Spreader

Libec LX10 M Two-Stage Aluminum Tripod System and H65B Head and Mid-Level Spreader
Libec LX10 M Two-Stage Aluminum Tripod System and H65B Head and Mid-Level Spreader

Libec LX10 M Two-Stage Aluminum Tripod System and H65B Head and Mid-Level Spreader

Libec LX10 M (LX-10-M) Tripod System with LX10 Head, RT50B Tripod, BR-6B Spreader, FP-2B Rubber Feet and RC-50 Case. Outstanding payload and rigidity with extremely smooth torque performance at the best value in the range. Remarkably high-performance features with incomparable cost effectiveness.

Key Features
  • Lightweight and robust
  • 2-stage construction
  • High payload capacity
  • Supports 35 Pounds
  • Sliding Balance Plate with Safety Stop
  • +85 to -65° Tilt Range
  • 100mm Half Ball

The Libec LX10 M Two-Stage Aluminum Tripod System and H65B Head and Mid-Level Spreader supports cameras and accessories weighing up to 11 pounds. The head and legs feature a 100mm ball/bowl, which provides a wide platform for stable shots. The legs are made from aluminum and feature three leg sections. The head and legs come with a mid-level spreader, and the system is height-adjustable from 32 to 67.5". To aid in leveling your shot, a bubble level is incorporated into the head. The head also features a sliding baseplate that allows you to adjust the balance of your camera. It provides fixed counterbalance that helps the fluid head support loads up to 35 pounds. With individual fluid drag adjustments for both pan and tilt, you can adjust the fluid head to suit your shooting style or the needs of the shot. The head features discreet pan and tilt locks, and the removable pan handle can be attached to either side of the head by via the built-in rosettes. The system have Spiked metal feet beneath the rubber caps and foot pads. Shop Libec LX10 M from UBMS Dubai . We can provide best price for Libec tripods . We have huge collection of Libec tripods . Buy from our Dubai Showroom or order Online .

  • The sliding balance plate features a total of four inches of balance adjustment, two inches forward and two inches back of center. This does not take into account the integrated balance slot that allows you to adjust the position of the captive camera tie-down screw.
  • The head incorporates a small stud at the front that prevents the balance plate from sliding out.
  • The included mid-level spreader prevents the tripod's legs from flying apart, and is well suited for use one even and uneven surfaces. You can use the mid-level spreader to secure your legs on rocky terrain, as well as on stairs, unlike a ground level spreader, which would prove unstable.
Libec LX10 Specs
Payload
35 lb / 16 kg
Counterbalance
Fixed
Drag Mode
Two-step
Tilt Angle
+85° / -65°
Camera Plate
Sliding
Sliding Range
±2" / 50 mm
Plate Attachment
Two 3/8"-16 screws
Spare Screw
3/8"-16
Section
Two-stage
Bubble Level
Non-illuminated
Ball Diameter
100 mm
Temperature Range
-4 to 140°F / -20 to +60°C
Height
32.0 to 67.5" / 81.3 to 171.4 cm
Weight
16.3 lb / 7.4 kg

In the Box

  • Libec LX10 M Two-Stage Aluminum Tripod System and H65B Head and Mid-Level Spreader
  • RC-50 Tripod Case for RT40RB (Black)
  • Standard Manufacturer's Warranty
Write Your Own Review
You're reviewing:Libec LX10 M Two-Stage Aluminum Tripod System and H65B Head and Mid-Level Spreader
Your Rating