Datavideo ITC-100 Intercom

Datavideo ITC-100 Intercom
Datavideo ITC-100 Intercom Datavideo ITC-100 Intercom Datavideo ITC-100 Intercom Datavideo ITC-100 Intercom Datavideo ITC-100 Intercom Datavideo ITC-100 Intercom

Specs Table

Power DC12V 8W
Tally 2 x 15 Pin DSub Sockets for Tally A and B
MIC / Headset 1 x 3.5mm Stereo Jack Socket ( For Headphone / Microphone combination) Headset Impedance 8~600 ohms 100mW(min)
Headphone 1 x 1/4" (6.3mm) Stereo Headphone Socket Headset Impedance 8~600 ohms 100mW(min)
Light Socket (DC 12 V) 3 PIN XLR Connector PIN 2: 12V PIN 3: GND Light Power Consumption: 12 V / 100 mA (MAX.)
Microphone 3 PIN XLR / ¼” (6.3mm) Jack Microphone Socket Switchable Condenser / Dynamic Input Microphone Level -67 dB
Frequency Response 550-3.6 kHz

In the Box 

  • 1 x ITC-100 Base Unit
  • 4 x ITC-100SL Belt Pack
  • 4 x ITC-100SL Carry Case
  • 4 x Cable 5piin XLR to XLR
  • 4 x 3.5mm Jack to 3.5mm Jack Cable
  • 4 x Headset with microphone
  • 4 x Tally LED Indicator
  • 1 x XLR Gooseneck Microphone
  • 1 x XLR Gooseneck Light
  • 1 x 12V 1A Power Supply Unit
  • 1 x Thank You Card

The Datavideo ITC-100 Intercom System provides 8-Way talkback and tally indicators. The director can select to talk to an individual channel or to all channels simultaneously.

The ITC-100 is a standard 19" 1U rack design, so it is easy to integrate into any rack system for using in the field or studio.
ITC-100 includes 4 ITC-100SL Belt Packs.

  • Supports up to 8 wired users
  • Uses your choice of headsets, from low-cost cell phone sets to high-quality professional units
  • Uses cables up to 984 ft to connect beltpacks
Write Your Own Review
You're reviewing:Datavideo ITC-100 Intercom
Your Rating