ARRI SkyLink Three Receivers with Base Station Kit (Edison)

ARRI SkyLink Three Receivers with Base Station Kit (Edison)
ARRI SkyLink Three Receivers with Base Station Kit (Edison) ARRI SkyLink Three Receivers with Base Station Kit (Edison) ARRI SkyLink Three Receivers with Base Station Kit (Edison) ARRI SkyLink Three Receivers with Base Station Kit (Edison) ARRI SkyLink Three Receivers with Base Station Kit (Edison)
$3,685.00
SKU
ARRI SkyLink Three Receivers - L0.0020060

ARRI SkyLink Three Receivers with Base Station Kit (Edison) 

Key Features 

  • For SkyPanel LED Softlights
  • Wireless for all Skypanels and L-series luminaires
  • LumenRadio CRMX & Wi-Fi Chipsets
  • Wireless DMX512 & RDM Communication
  • Compact and rugged design
  • Direct Control from Tablet or Computer
  • Outstanding Range
  • Wi-Fi Range: 246'
  • Supports One Universe with 512 Channels
  • Universal 100-240 VAC Power Supply
  • Receiver Powered by Integrated USB Cable

Specs Table

SkyLink Base Station (Edison)  
Wireless Protocols LumenRadio CRMX
Wi-Fi
Frequency 2.4 GHz
Channels 1 universe with 512 channels
DMX Connectors 5-pin XLR female
Power Requirements Device Input Voltage: 5 - 12 VDC
Operating Conditions Temperature: -4 to 122°F / -20 to 50°C
Dimensions 10.7 x 6.0 x 5.4" / 27.2 x 15.2 x 13.6 cm
Weight 2.5 lb / 1.1 kg
SkyLink Receiver  
Wireless Protocols LumenRadio CRMX
Frequency 2.4 GHz
DMX Connectors 5-pin XLR female
Power Requirements Device Input Voltage: 5 VDC
Operating Conditions Temperature: -4 to 122°F / -20 to 50°C
Dimensions 4.0 x 1.1 x 4.4" / 10.2 x 2.7 x 11.3 cm
Weight 0.25 lb / 0.8 kg

In the Box

  • SkyLink Base Station (Edison)
    2 x
  • Antenna for SkyLink Base Station
  • Power Supply for SkyLink Base Station
  • Standard Manufacturer's Warranty
  • 3 x SkyLink Receiver (Blue/Silver)
  • Antenna for SkyLink Receiver
  • Standard Manufacturer's Warranty

SkyLink Base Station (Edison)
Don't worry about wiring DMX cables to each of your SkyPanel fixtures. The SkyLink Base Station from ARRI enables wireless DMX and RDM communication with SkyPanels and enables direct control over the lights from an application for tablets and PCs. The base station is equipped with both a LumenRadio CRMX transmitter and a Wi-Fi chip that permits communication between a networked computer and numerous receivers.

SkyLink Receiver
By using a SkyLink Receiver from ARRI you can quickly and easily upgrade all your existing SkyLink fixtures to support the LumenRadio CRMX wireless DMX protocol, including remote control via the SkyLink Base Station. This compact device attaches directly to the rear of the light using a 5-pin XLR connector, where it provides wireless DMX512 and RDM communication from ranges up to 1640' away. It is also very simple to install, as it features an integrated USB cable to receive power directly from the fixture instead of requiring a separate power supply.

Write Your Own Review
You're reviewing:ARRI SkyLink Three Receivers with Base Station Kit (Edison)
Your Rating