Aputure AL-F7
The Most Versatile On-Camera Variable Color LED Light (3200 to 9500K)
- High Color Rendition; CRI/TLCI 95+
- Stepless Brightness & Color Temperature Control
- Advanced Readout Design
- Light & thin Design
- Multiple Charging Methods
- Efficient Power Consumption
- Wide Color Temperature
Accurate Stepless Brightness Controls
The Amaran AL-F7 offers an advanced output readout that includes stepless controls all the way to 1% (8 lux @ 0.5m, 3200K), allowing for extremely fine-tuning of your light for shooting in environments that require very precise lighting scenarios. To know more about the Aputure Amaran AL-F7 you can contact UBMS Dubai Showroom.
Multiple Charging Methods
The Amaran AL-F7 can be charged in several different ways: you can use D-Tap, USB Type-C, or a Sony NP-F series battery. Whether it’s through a power bank, V-Mount battery, or classic Sony NP-F battery, powering this light is easy. With an onboard display on the back of the F7, you can easily see how much battery remains, as well as your brightness and color temperature settings.
Brightness Comes in a Small Package
The F7 packs 256 high-CRI LED lights into one small panel,offering a strong output of up to 14000 lux @ 0.3m. Following the lineage of theAmaran family, the F7 inherits the fundamental belief that high output, color-accurate lighting should always be affordable. UBMS can provide best price and offers for Aputure Lights.
Swift & Easy Setup
The AL-F7 makes the shooting process much more efficient and smoothly. The adjustment for the color temperature and brightness can be easily switched back and forth by a simple touch. The built-in memory allows the last settings of the light to be stored automatically without any manual involvement.
Ultra-Wide Color Temperature Range
The Amaran AL-F7 has a super wide range of 3200K-9500K, allowing you to have more choices for a wide range of shooting conditions. This expanded bicolor option also means that the light’s absolute maximum output will be right at 5500K, or perfect daylight.
Lightweight and Portable
The Amaran AL-F7 weighs only 260g, or just over half a pound. There is a 1/4 screw thread built-in on each of the three sides of the light, making the F7 an extremely versatile light to be used in various settings. In addition, a cold shoe mounting ball head and a canvas bag are also included in the package.
The Aputure Amaran AL-F7 On-Camera Variable Color LED Light is an on-camera LED light that utilizes 256 LEDs with a CRI of 95+ to deliver variable color illumination with high color accuracy. This fixture features variable color temperature output from 3200 to 9500K. The fixture's 45° beam angle produces a brightness of 1500 lux at 3.3' when set to 5500K.
A stepless dimming dial is provided on the back of the unit for adjusting light output from 1 to 100%. Color temperature and brightness are also controlled by a single stepless rotating knob. The built-in LCD screen provides information on the remaining battery charge, color temperature, and brightness. Two 1/4"-20 threaded mounting holes, one on top and one at the bottom of the fixture, provide for a variety of mounting possibilities.
Key Features- 256 LEDs with 45° beam angle.
- 3200 to 9500K variable color temperature light fixture.
- High CRI of ≥95.
- Stepless dimming dial for adjusting light output from 1 to 100%.
- Powered by an L-series battery, D-Tap, or USB-C.
- Because the light has a variable color range of 3200 to 9500K, when the light is set to 5500K (daylight balanced) both sets of LEDs are on at full, providing the maximum brightness from this fixture when compared to using the light at 3200 or 9500K. The LCD screen provides information on the fixture's output as well as the charge state of the battery. The screen also indicates whether the adjustment knob is controlling brightness or color temperature. To switch from brightness to CCT or CCT to brightness, just apply a short press to the adjustment knob.
- The included cold shoe ball joint adapter enables mounting the light to your camera's accessory shoe via the 1/4"-20 threaded hole on the fixture. In addition, the bottom of the cold shoe foot features a 3/8"-16 threaded hole, and includes a 3/8"-16 to 1/4"-20 reducing bushing.
- Included with the fixture is a diffusion filter.