WM-1000 - Mount Type:Dual-Channel


RTS Intercom Systems

Single and Dual Channel Wallmount Intercom System


* Please note that the price shown does not include, Shipping, Custom duties, Bankwire charges and local taxes that may apply depending on your location. Thank you.


WM-1000 - Wall-mount, one-channel headset station. Mounts in a standard electrical outlet box (doublewide type). High-quality audio system with mic limiter circuit. Back-lit control buttons for low-light operation. Talk and listen buttons with momentary/latching operation. Call/send button with call/receive indicator light. Call/receive beep tone with on/off selection. Mic Kill Receive with on/off selection. Side tone trimmer. Quick-connect, wire clamp terminals for party-line wire connections. Four-pin male XLR headsets (balanced or unbalanced microphone). Powered from party-line, local power optional. Clear-Com compatible.

*WM-2000 - Wall-mount two channel headset station. Identical to WM1000, except includes channel-select switch with two-color back-light to indicate party-line one or two.

• Call Key
• Channel Select Switch*
• Clear-Com Compatible
• Configuration DIP Switches
• Connections Terminal Block
• Dynamic-Mic Headset Connector
• Intercom Listen Key
• Intercom Talk Key
• Mounting Holes
• Sidetone Trimmers
• Telex Audiocom/Clear-Com Selector Switch
• Volume Control


Input Impedance 300 ohms
Weight 1 lbs (0.45 kg)
Width 4.6" (11.68 cm)
Common Mode Rejection Ratio greater than 50 dB
Storage Temperature -20
Depth 2.3" (5.84 cm)
Height 4.5" (11.43 cm)
Operating Temperature -15
Output Level 1 Vrms nominal
Power requirement Phantom Power: 24 VDC nominal (12 to 30 VDC), 65 to 150 mA Local Power: 12 to 15 VDC, 65 to 150 mA
Signal-to-Noise Ratio less than -70 dB

Item Includes

Standard Manufacturer's Warranty

Recommended Addons

Recommended Addons

Related Products not found


You're reviewing: WM-1000 - Mount Type:Dual-Channel