More Views

RTS Intercom Systems

Frequency-Agile Beltpack

Call For Price Call For Price

* Please note that the price shown does not include, Shipping, Custom duties, Bankwire charges and local taxes that may apply depending on your location. Thank you.


The RKP-4 is the beltpack for the RKP-4 keypanel system. The wireless system is a full duplex (simultaneous talk and listen) audio system that is designed to work with ADAM, Cronus, Zeus and Zeus II Digital Matrix Intercom Systems. The RKP-4's operation is very similar to the MKP-4, BKP-4, TKP-4 and WKP-4 four button wired keypanels. The beltpack, via the base station, allows communications with a Digital Matrix and acts as a keypanel on the system.

• Alphanumeric Call Waiting Display
• Auxiliary Balanced Audio Input & Output
• Backlit Base Station LCD
• Base Stations are Table or Rackmountable
• Beltpack units contained in a weather and shock resistant die cast magnesium case
• ClearScan Function
• Compatible with ADAM, ADAM-CS, Cronus, & Zeus Digital Matrix Intercom Systems
• Four-Wire Balanced Audio Input & Output
• Frequency-Agile Base Station & Beltpacks
• Full-Function Intercom Keys with LED Indicators
• Relay Contact Closure on the Base Station that can be activated from the Beltpack
• Telex Communications Proprietary Digitally Encrypted Wireless Communication Between the Base Station & Beltpack
• The Frequencies of a Beltpack may be Changed at the Beltpack or from the Base Station


Dimension (HxWxD) 5.35" (13.59 cm) x 3.75" (9.53 cm) x 2.02" (5.13 cm)
Distortion less than 1% at peak level
Weight 1.2 lbs (0.55 kg)
Frequency Response 100 Hz-4.0 kHz
Sensitivity 7 mV (200 Ohm Source)
Common Mode Rejection Ratio 70 dB or better
Peak Deviation Complies with FCC 74.861
RF Frequency Range 482 - 608 MHz, 614-746 MHz in 18 MHz TX and RX bands
Power requirement 6
Signal-to-Noise Ratio 80 dB (30 kHz Low Pass Filtered)

Item Includes

Standard Manufacturer's Warranty

Recommended Addons

Recommended Addons


You're reviewing: RKP-4