DJI Phantom 2 Vision+ v3.0 with Gimbal-Stabilized 14MP Camera


More Views


DJI Phantom 2 Vision+ v3.0 features updated Transmitter with Gimbal Control, more efficient motors, ESC and Props, camera with 3-Axis Gimbal Stabilizer, 14MP Still and 1080p Video and Wi-Fi Downlink for Smartphones.

Call For Price Call For Price

* Please note that the price shown does not include, Shipping, Custom duties, Bankwire charges and local taxes that may apply depending on your location. Thank you.


The DJI Phantom 2 Vision+ v3.0 Quadcopter with Gimbal-Stabilized 14MP, 1080p Camera features a number of notable hardware updates over the previous Phantom 2 Vision+ model, including more efficient motors, redesigned self-tightening props, a new transmitter (radio controller) with built-in battery and gimbal control dial, and other improvements. 

It is based on the same air frame as the Phantom 2 and Phantom 2 Vision. Unlike its siblings, however, it features a 14MP camera that is stabilized and controlled with an integrated 3-axis gimbal. Gimbal stabilization makes the Phantom 2 Vision+ ideal for shooting aerial footage and photos. The camera can take 14MP, Adobe DNG RAW photos, and can record video in 1080p Full HD at 30 fps or 720p at 60 fps for creating slow motion effects.

The Phantom 2 Vision+ ships ready-to-fly, meaning that a radio controller--often referred to as a transmitter is included with it and is pre-bound to the aircraft and that only minimal assembly using common household tools is required. It features a 5200mAh battery that can sustain the quadcopter in the air for up to 25 minutes. The transmitter features a line-of-sight range of up to 2625', depending on conditions. 

Redesigned Transmitter (Radio Controller)

The radio controller (more commonly known as a transmitter in RC lingo) has been updated with some notable additions:

  • Left Dial: Use this to operate the tilt function of the gimbal
  • Trainer Port: Connect the remote control to the computer to run a simulation application
  • Throttle Lock: Pull down the throttle stick to descend; the stick will lock into place and the aircraft will descend steadily. Push the throttle stick upward to release throttle lock
  • LED Battery Indicator: Foregoing AAs, the transmitter now runs on a built-in LiPo battery. Four LEDs on the front tell you how much charge is left
  • Micro-USB Port: Use the micro-USB port to recharge the built-in battery. The LED indicators will display charging status as the battery tops up
Key Features:
  • Updated Transmitter with Gimbal Control
  • More Efficient Motors, ESC and Props
  • Camera with 3-Axis Gimbal Stabilizer
  • Takes 14MP Still and 1080p Video
  • Wi-Fi Downlink for Smartphones
  • iOS/Android App for Monitoring/Control
  • Up to 25 Minutes Flying Time
  • GPS-Based Autopilot with Return to Home
  • Intelligent Orientation Control (IOC)
  • Stationary Hover with GPS Attitude Mode


Weight 2.7 lb (1242 g), Take-Off Weight: < 3.1 lb (< 1400 g)
Type Battery Type: Lithium-polymer (LiPo)
Operating Temperature 32 to 104°F (0 to 40°C)
Dimensions Propeller Length: 9" (22.86 cm) Diagonal: 13.8" (35 cm)
Sensor Size Camera sensor size: 1/2.3"
Video Resolutions 1080p30 720p60
Resolution Sensor Resolution: 14 MP (4384 x 3288)
Photo Resolutions 14 MP
Lens Recording FOV: 100 or 85° -- selectable

Item Includes

  • Standard Manufacturer's Warranty
  • Phantom 2 Vision+ 14 MP HD FPV Camera with Gimbal
  • Transmitter (Radio Controller)
  • Wi-Fi Range Extender
  • Smartphone Mount for Controller
  • Landing Gear (Pair)
  • 5200 mAh LiPo Battery
  • AC Transformer to Charge Battery
  • 8 x Self-Tightening Props
  • 4GB MicroSD Memory Card

Recommended Addons

Recommended Addons


You're reviewing: DJI Phantom 2 Vision+ v3.0 with Gimbal-Stabilized 14MP Camera