DJI Inspire 1 v2.0 Quadcopter with 4K Camera and 3-Axis Gimbal

Zoom

DJI
DJI Inspire 1 v2.0 Quadcopter with Integrated Camera and 3-Axis Gimbal. (Mfr # CP.BX.000103)

Regular Price: $3,388.00

Special Price $2,188.00

* Please note that the price shown does not include, Shipping, Custom duties, Bankwire charges and local taxes that may apply depending on your location. Thank you.

Features

The DJI Inspire 1 v2.0 Quadcopter with Integrated Camera and 3-Axis Gimbal features a retractable arm system whereby the underside of each prop motor has a foot to act as a landing pod when the arms are lowered. In-flight, the arms lift up to provide the camera an unobstructed 360-degree view. A 3-axis gimbal keeps shots steady and the camera pointed the same direction as the quadcopter banks and turns. The camera records internally to microSDHC/SDXC memory cards (16GB included) and can also beam a live 720p feed to a mobile device running the DJI Lightbridge app or a monitor or FPV glasses with an HDMI input. One transmitter (radio controller) is included and a second can be added so that one operator can pilot and another can pan and tilt the camera.

As with many other multi-rotor systems, the Inspire 1 relies on a GPS-based stabilization system that – thanks to spatial awareness – is able to hold a position even when experiencing wind interference, can compensate for overzealous pilot inputs to help avoid stalling, automatically brings the aircraft home in the event of signal loss or at the press of a button, and makes possible a number of semi-automated flight modes that can be enabled through the app. There is also an "indoor" mode which relies on Vision Positioning technology – essentially a special camera – provide stability indoors or in other contexts where GPS is unavailable (Note: certain features will be unavailable in indoor mode).

Key Features:

  • Capture 4K Video and 12MP Stills
  • 3-Axis Gimbal Stabilizes Camera
  • Up to 1.2 Mile Radio Range
  • GPS-Based Flight Control System
  • Vision Positioning for Indoor Flying
  • Live 720p HD Monitoring with Lightbridge
  • Thrust-Boosted Motors / New Propellers
  • Retractable Carbon Fiber Arms
  • Unobstructed 360° Shooting
  • Dual Transmitter Operation Supported

Specifications

Operating Frequency Band Transmitter to Transmitter: 5.728 to 5.850 GHz Transmitter to Aircraft: 2.400 to 2.483 GHz
Weight With Battery: 6.5 lb / 2.9 kg
Tilt Range / Angle 35°/s
Storage Temperature Less than 3 Months: -4 to 113°F / -20 to 45°C More than 3 Months: 72 to 82°F / 22 to 28°C
Dimensions Diagonal Distance: Landing Gear Lowered: 22" / 559 mm Landing Gear Raised: 22.9" / 581 mm Overall Dimensions: 17.2 x 17.8 x 11.9" / 438 x 451 x 301 mm Transit Case: Exterior: 22.4 x 19.7 x 10.6" / 57 x 50 x 27 cm
Power requirement 1.2 A at 7.4 VDC
Battery System 6S LiPo; 6000 mAh
Flight times With Zenmuse X3: Up to 18 minutes With Zenmuse X5/X5R: Up to 15 minutes
Model Gimbal: Zenmuse X3
Photo Resolutions 12.0 MP
Sensor Sony EXMOR 1/2.3" CMOS
Hover Accuracy Vertical: 1.6' / 0.5 m Horizontal: 8.2' / 2.5 m
Camera Model Name: X3 Designation: FC350
Maximum Speed 72.2 fps / 22 m/s (Attitude mode; no wind)

Item Includes

This bundle includes: The Inspire 1 along with gimbal and camera, a transmitter, a flight battery, a battery charger, and a tablet holder that mounts on the transmitter. To store and transport the aircraft, a case with fitted cut-outs is included. It holds the Inspire with rotors detached, one or two transmitters, props, spare flight batteries, and more. Standard Manufacturer's warranty.

Recommended Addons

Recommended Addons

Related Products not found

Review

You're reviewing: DJI Inspire 1 v2.0 Quadcopter with 4K Camera and 3-Axis Gimbal

 
 

ABOUT STORE

UBMS is the leading distributor of Broadcast & professional video equipment in the Middle East & Africa based in Dubai, United Arab Emirates.

Address: Rashid Al Majid Building, Airport Road, Dubai

Tel : +971 4 2827171

Email: info@unitedbroadcast.com