Cronus - Frame Linking Type: Co-axial


RTS Intercom Systems
Cronus frame incl. Two redundant PSU and Cronus Master controller, coax linking.

* Please note that the price shown does not include, Shipping, Custom duties, Bankwire charges and local taxes that may apply depending on your location. Thank you.


RTS Cronus intercom is a modular, 32-port digital matrix intercom in 2RU (rack units) that can hold up to four AIO analog or RVON-C VoIP cards with eight ports each. Based upon an advanced DSP architecture, Cronus intercom has the ability to link up to four units into a single 128-port matrix. The Cronus can be preconfigured for fiber with a connection up to 9.3mi (15km), or coax for a connection up to 300 ft. (91.4m). When connected as a single matrix, the individual Cronus intercom controls remain autonomous and independent at each matrix for the highest reliability. The Cronus is available with an analog card, or the RVON-C VoIP card.

USB Connectivity
Convenient front panel access as well as traditional rear access for system programming. Note, you may use either the front panel access or the rear panel access at a time.

Advance DSP
Digital signal processing designed to support audio signal processing on all 32 ports (inputs).

Modular Architecture
The modular architecture allows for port expansion from 8 to 32 ports giving each user expandable systems in the field.

Redundant Power Supply
Each chassis is powered by two power supplies, either of which can sufficiently power all the equipment ALONE. This provides constant power and disaster recovery even with the failure of one power supply.

Optional Backcards
Different backcards with or without transformers available.

RVON-C VoIP Option Card

Voice-Over IP option expands the capabilities of the system.


Input Impedance 22k
Audio Level 20 dBu
Weight 14.15 lbs (6.42 kg)
Output Impedance 600
Frequency Response at 20 dBu: within
Width 19" (48.26 cm)
Storage Temperature -20
Depth 13.25" (33.66 cm)
Height 3.5" (8.89 cm)
Sampling Frequency 48 kHz
Operating Temperature 0
Cross Talk at 20 dBu: less than -60 dBu
Signal Level Balanced
Total Harmonic Distortion (THD) +N at 20 dBu, 1 kHz (unweighted): less than 0.007%
Nominal impedance 8 dBu
Power requirement 90-240 V, 50/60 Hz, 1.4 A
Signal-to-Noise Ratio at 20 dBu: (A-weighted): less than 90 dB
Pixel Resolution 24 bits

Item Includes

Standard Manufacturer's Warranty

Recommended Addons

Recommended Addons


You're reviewing: Cronus - Frame Linking Type: Co-axial